Yb³⁺-doped silica fibers have been one of the most important gain mediums for high-power laser applications due to their high efficiency and good beam quality. However, the fabrication of the key material——Yb-doped silica glass with good radiation resistance performance and high doping concentration is a big challenge.

Recently, the research group from Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, have investigated the effect of AIPO₄ join concentration on optical properties and radiation performance of Yb-doped silica glass. The results were published on J. Appl. Phys.

In the experiment, a series of Yb-doped silica glasses containing equimolar amounts of P₂O₅ and Al₂O₃ were prepared using a modified sol–gel method. The ratio of Al and P was precisely controlled to be close to one.

Their study showed the sol-gel process was conductive to improve the dispersity of co-dopants in silica glass. With spectroscopy and electron paramagnetic resonance measurements, researchers found that the increase of AIPO₄ join concentration in Yb-doped silica glass led to a decrease in the refractive index with a factor of 1.1*10^-4, a decrease in Yb clusters concentration and meanwhile an improved radiation hardening performance.

These results demonstrate that fiber laser performance can be less vulnerable to Yb clusters and ionizing radiations and therefore provide the basis for refractive index control in fiber core and contribute to the design of Yb-doped large mode area silica fiber.

It is hoped that Yb-doped silica glass with a high concentration of AIPO₄ join may have potential applications in high-power space fiber lasers.

This research was supported by the National Key Research and Development Program of China (No. 2016YFB0402201).

 
The influence of AIPO₄ join (Image by SIOM)

Article website:
https://aip.scitation.org/doi/full/10.1063/1.5096469
Mr. Cao Yong
General Administrative Office
Shanghai Institute of Optics and Fine Mechanics, CAS
Email: caoyong@siom.ac.cn